3 Pcs Go Kart Drive Belt 30 Series Compatible with Yerf Dog and Manco 5.5hp 6.5hp

Product Description

Replacement for:

This product is specifically designed to work with the Comet 30 Series torque converters, catering to engines ranging from 3hp to 8hp. It is compatible with various models and part numbers including:

• Yerf Dog: Q43103W & Q43203W (models 3002, 3200, 3202, 3203)
• Manco: 203591, 203591A, 203591B, 203591C
• Kartco: 7655
• Rotary: 10052

The asymmetrical cog belt is suitable for all Yerf Dog go-karts equipped with Tecumseh engines and belt-driven torque converters. It works seamlessly with Yerf Dog and Manco carts with 5.5hp and 6.5hp engines.

Size Specifications:

• Width: Approximately 0.75 inches (19mm)
• Length: Approximately 29.28 inches (744mm)

Please note that the angles differ on each side of the belt; one side features a nearly flat surface with an angle of 2.5 degrees, while the other side has an angle of 18 degrees. The pulley specified for use with this belt should measure between 7 5/16 inches to 7 5/8 inches for the 6” Driven version, or 6 13/16 to 6 7/8 inches for the 7” Driven version. Measurements are taken from the center of the clutch to the center of the driven pulley.

Important Instructions:

Prior to placing your order, carefully inspect the product's appearance, size, and shape. It is crucial to check and replace belts regularly, as they are rubber components subject to wear and aging due to prolonged use. To avoid unexpected breakage and damage to your vehicle's transmission components, regular inspections and timely replacements are highly recommended.

How to Choose the Right Belt: 1. Identify the series type. 2. Measure the Outer Diameter (O.D.) of the driven pulley located on the jackshaft. 3. Measure the Center Distance (C.D.), which is the precise distance between the center of the engine crankshaft and the center of the jackshaft. Accuracy is essential. 4. Utilize the two measurements—the driven pulley outer diameter and center distance—to identify the proper belt part number using the relevant chart provided below.

Interchangeable Part Numbers:

• 203591
• Q430203W

This universal Q430203W Go Kart Belt 30 Series is compatible with Yerf Dog models.

Compatibility:

This belt is replaceable for Yerf Dog Go Kart models Q43103W, including models 3002, 3200, 3202, and 3203. It is also a suitable replacement for Manco 203591 and works with 5.5hp and 6.5hp engines, as well as Kartco 7655 and Rotary 12-10052.

Size Summary:

• Width: Approximately 0.75 inches (19mm)
• Length: Approximately 29.28 inches (744mm)

Please note, measurements may have a slight manual error margin of 1-2cm. This is a non-original aftermarket part.

Notice:

This is an asymmetrical belt featuring a flat side and a bevel with an angle of about 18 degrees. As a consumable item, it is imperative to check and replace the kart belt regularly to ensure optimal performance.

product information: